Step-by-step Guide to Installing a New Shower Unit

Get A Free Estimate

Almost everyone seems to have their personal opinion when it comes to How to Install a Direct-to-Stud Shower Enclosure.

A successful shower setup requires mindful preparation and also a lot of work. Most of the times, you will certainly need to do 3 kinds of tasks: framing wall surfaces, installing the plumbing, and also finishing walls.

Various Sorts Of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower device can be connected to the bathroom faucet as per your requirement, as well as the water temperature can be changed by means of the faucets. Push-on mixers are cheap and also very basic to mount. Nevertheless, although the pipe link is basic, it is quickly removed. In addition, it is inconvenient to change the temperature level.

Bath/Shower Mixer: The tube and also spray of this sort of shower are incorporated with a bathroom mixer faucet, as well as the temperature can be adjusted through the bathroom faucets. It is an extremely affordable choice and no added plumbing is included. However, the bath/shower mixers likewise struggle with bothersome temperature control options.

Manual Mixer: The tube and spray of a hand-operated mixer shower system belong of the wall unit as well as the cold and hot water materials are attached to a single valve The temperature level and pressure of the water are regulated through either one or a range of handles (in more expensive showers). Although temperature level control is a lot easier in hand-operated mixer types, they are much more costly than the formerly mentioned mixers. They also need additional plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The pipe and also spray of this shower type belong of the wall device as well as the hot and cold water supplies are attached to a single shutoff here too. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to avoid it from becoming also warm. Among the greatest advantages of a thermostatic mixer shower type includes hassle-free temperature control. Nevertheless, it is one of the most costly of the different mixer options.

Power Shower: A power shower is a single device having a powerful electrical pump that is capable of altering both the water stress and temperature level. This type of shower can be fitted if there is water from a cold water tank as well as a warm water cyndrical tube. A power shower makes the adjustment of both pressure and temperature level very easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is supplied by a combination boiler under keys stress.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply as well as it heats up the water electrically. It is necessary to note that for this shower kind to be mounted, the keys stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature level and also stress to be changed by means of a handle. Designs with temperature level stabilisers are much better as they stay unaffected by various other faucets somewhere else in use within the house. A major downside of electric showers is that the control knob just allows for the alternative of high temperatures at much less pressure, or reduced temperatures at a higher stress. This is troublesome in the winter when the spray is typically weak as well as the keys water is cooler. However, this issue is dealt with in some models which are offered with a winter/summer setup.

Most Common Blunders

Violating or disregarding neighborhood code restrictions.

Making use of pipes that are also tiny.

Affixing copper to galvanized without utilizing a brass or dielectric suitable between the two.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your components when mounting them.

Not mounting an air void filling up for fixtures.

Cutting supply stub outs as well short to mount the shutoff valves onto after the ended up wall surface remains in area.

Not effectively aligning tubes into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will trigger a leak.).

When transforming the water back on in your house, always run the outdoors pipe valve or purge your commodes to hemorrhage dirt as well as air from the lines. This particles can cause issues in your sink taps and various other plumbing trim.

Preparation.

First of all, you must pick the kind of shower that you desire to mount. It is important to establish whether the selected shower can handling certain systems as well as can control a secure level of water with the boiler. The majority of shower systems nowadays are designed to be adaptable to different water pressures (such as saved warm water as well as cool mains).
It is likewise important to take into consideration the water stress and the preparation of the piping and also drainage for the shower.

Method.

Depending upon the sort of shower you wish to install, the shower head must either be suited order to prevent its contact with the water in the bathroom listed below or the base tray, or it has to have a check valve.
Before starting, it is a good idea to note the settings of the shower head and control, and to intend the pipe-work entailed. In addition, the water drainage system to get rid of the waste water will need to be planned. Both settings of the wire route as well as the shower button will additionally need to be taken into consideration if an immediate or electrical shower unit is being set up.
Make use of the instruction guide supplied with the shower device to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is very important to cut off the water supply. In order to safeguard the pipes, they must be offered a water-proof covering as well as additionally fitted with separating valves. The pipes can after that be buried into the wall as well as smudged over to neaten the general appearance.
Fit the base tray, shower head, and also fittings.
Attach the major shower control to the pipes that will be providing the water (This may require a female screw string adapter).
Reconnect the water and examination the pipelines for any leakages, as some may require tightening up.
If you are installing an electric shower, keep in mind to switch off the electricity supply before making any type of electric links. When these connections have been made (there should be support within the user's manual), the power supply can be switched over back on.

Readjusting Water Pressure to Match Your Shower.

The cold water tank can be raised to a greater height (sometimes as low as 150mm (6inches)) by installation a strong wooden assistance beneath it - possibly composed of struts and also blockboards. If you pick this option, the primary as well as distribution pipes will likewise need to be increased to fulfill the new height of the reservoir.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it has to be attached right into the power supply in order to operate.

Piping as well as Drainage.

It is best to use 15mm size supply pipelines, as well as make the runs to the shower as brief as well as straight as possible so regarding preserve maximum pressure and reduce warm loss. Furthermore, by minimising making use of joints for pipe edges, you can reduce the resistance in the flow of the water supply. You can attain this by bending the pipelines instead.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm certainly very eager about How to Install a Shower Enclosure and I really hope you enjoyed reading my page. Liked our posting? Please share it. Let someone else check it out. Thanks a lot for your time spent reading it.

Contact Us Now